Specification（性能规格）
Part Name(产品名称) | 三相直流无刷电机驱动器 |
Part No（产品型号） | WS2403DY01V04 |
Rated Voltage（额定电压） | 24Volts |
Voltage Range(允许操作电压) | 18-26Volts |
Max continuous Current（最大连续电流） | 3A |
Max Peak Current（最大瞬间电流） | 6A |
Hall effect angle（霍尔电气角度） | 60Degree |
Weight（产品重量） | 18Gram |
Power Source input(电源输入端口)/Motor Connection(与电机连接端口)
PIN(脚位名称) | |
C | Motor Phase C (C相) |
B | Motor Phase B (B相) |
A | Motor Phase A (A相) |
GND | GND (霍尔供电负极) |
HC | Hall C (霍尔C输入) |
HB | Hall B (霍尔B输入) |
HA | Hall A (霍尔A输入) |
5V | Voltage supply to Hall (霍尔供电正极) |
PIN(脚位名称) | |
VCC | +24VDC |
GND | GND |
Don’t reverse the Connection of the VCC and GND, otherwise the PCB will be damaged.
请注意正负极不要接反，否则驱动器会烧掉
Control connection (控制端口说明)
PG | Speed Pulse Output (速度脉冲输出): 1Hz=60r/min |
FR | High or not connected=CCW, Low or connected to GND=CW (与GND连接，电机顺时针旋转；与GND 断开，电机逆时针运转) |
EN | High or not connected= Running, Low or connected to GND=Stop (与GND连接，电机停止运行；与GND 断开，电机正常运行) |
GND | GND |
VSR | Input 0-5VDC voltage or PWM to change motor speed; PWM=2~50kHz / 5V; (输入0-5V 直流电压或者PWM，可以调节电机的转速;PWM频率2~50kHz,幅值5V) |
5V | 5V voltage supply(驱动器输出5V直流电压) |
Environment condition（环境条件）：
Running(运转) Temperature: -15 C~60 C
Humidify: RH20%~85%
Storage (保存) Temperature: -15 C~85C
Humidify: RH20%~85%
Certification: CE, RoHS
认证情况： CE, RoHS